|
|
The new 3" anti-roll assembly has a few distinct advantages over the older 1.25" anti-roll assembly. The larger diameter tube is 88% stiffer without a significant gain in weight. The tube is held by an aluminum housing with a self-aligning Delrin® bearing block. This allows the chassis to flex without adding bending pressure to the torsion assembly. |
| |
|
|
| All MW 4130 tubing is certified aircraft quality material that meets 6736 specifications. Small quantities of under a 100’ are sold at the cut price. Large quantities of 100’ or more are sold at the 100’ price. Different tubing sizes can be combined to produce an order of more than 100’ but they must be full lengths. Full lengths can be anywhere from 17’ - 24’. |
| |
|
| Mark Williams offers four different car kits, solid mount, 4-link, funny car/altered and a front engine dragster. The solid mount and 4-link dragsters are modern rear engine style cars. The 4-link kit with its suspension offers obvious traction advantages over its solid mount cousin, but at a higher cost. Solid mount dragsters can be converted to a 4-link dragster at a more convenient time. All Mark Williams chassis kits are are SFI conformant, including the front engine dragster kit. |
| |
|
|
| 4 Link
Kits & Hardware |
Brackets Tabs & Dzus |
Chassis Connectors |
| Chassis Kits & Prints |
Chrom-Moly |
Controls & Cables |
| Filler Caps & Bungs |
Front Tires & Wheels |
Motor Plates |
| Rod Ends & Clevises |
Spindles, A-Arm Kits & Front Axles |
Steering Boxes & Parts |
| Steering Wheels & Hubs |
|
|