Toll Free: 1-866-508-6394
OR Contact Us
OR Contact Us
Shop by Category
CV Flange Yokes | ||||
| Series / Size | Pinion / Transfer Case | |||
| 9" Ford, 35-Spline | Atlas | GM 14-Bolt | ||
| 15 / 930 | -- | 39334 | -- | |
| 21 / 934 | 39332 | 39335 | -- | |
 | ||||
Pinion Yokes | ||||
| Series | Pinion / Transfer Case | |||
| 9" Ford, 35-Spline | Atlas | GM 14-Bolt | ||
| 1350 | 39011 (steel) 39911 (aluminum) | 39086 | 39085 | |
| 1410 | -- | 39087 | 39083 | |
| 1480 | 39072 (steel) 39972 (aluminum) | 39088 | 39084 | |
| ||||
About U-Joints | ||||
| Series / MW Part Number | Cap Diameter | Width | Recommended U-Bolt / Cap Kit | |
| 1350 - 39029 | 1.1875" | 3.625" | 39010 U-Bolts 39112 Cap Kit | |
| 1410 -- | 1.1875" | 4.1875" | 39010 U-Bolts 39112 Cap Kit | |
| 1480 - 39080 | 1.375" | 4.1875 | 39075 Cap Kit | |
** Note: MW does not recommend greasable u-joints because their hollow body decreases strength. | ||||
| ||||
For 1350 series, Four - 12mm Bolt Hole on 4.250" bolt circle.
32 spline, for Atlas Transfer Case, 4.252" Diameter, Six - 10mm X 1.5mm Threaded Bolt Holes on 3.701" bolt circle. Fits Size 930 / Series 15 CV Joint
32 spline, for Atlas Transfer Case, 5.039" Diameter, Six - 12mm X 1.75MM Thread Holes on 4.252" bolt circle. Fits Size 934 / Series 21 CV Joint
32 spline, for 1350 series U joint, Atlas, GM NP203, GM NP205 transfer cases. "B"= 3.720"
32 spline, for 1410 series U joint, Atlas, GM NP203, GM NP205 transfer cases. "B"= 3.720"
32 spline, for 1480 series U joint, Atlas, GM NP203, GM NP205 transfer cases. "B"= 3.720"
M12-1.75 pitch x 30mm thread length, 6 point 14mm hex, (set of 4)
CV Flange, for Series 21 CV (940) type, For Ford 9" 35 spline pinion, 5.039" Diameter, Six -12mm X 1.75mm Thread pitch Bolt Hole on 4.252" bolt circle. 3.80" overall length. Made from high strength heat treated 4140 steel and black oxide coated.
29 spline, for 1410 series U joint. "B"= 3.720"
29 spline, for 1350 u-joint. "B"=3-1/32"
30 spline, for GM 14-Bolt, 5.438" Diameter, Four - 12mm Bolt Hole on 4.25" bolt circle
30 spline, for 1410 series U joint. "B"= 3.720"