Your basket is empty.
0
Log In or Register
Enter your e-mail address to receive our newsletter
$72.36
Product Code: 53181
Timken® bearings and races for 8-3/4" Mopar
$67.50
Product Code: 53960
For use in heavy-duty 3.265" bore cases (pair)
$133.50
Product Code: 53950
Replacement cap, billet steel, 3.265" bore case (each)
$41.25
Product Code: 58570A
3/8" diameter bolts with nuts and washers. Set of 10.
$210.00
Product Code: 308
Mopar 8-3/4", 3.265" O.D. (pr)
$729.15
Product Code: 300M
2" diameter, 39-1/2" long alignment bar, with alignment sleeve, choice of center alignment rings
$300.00
Product Code: 302
For 3.150" and 2.875" O.D. axle bearings
$75.00
Product Code: 888
For Dana 60™, 12 bolt GM, 9" Ford, 8-3/4" Mopar and '57-'64 Olds/Pontiac
$205.51
Product Code: 83-1031
For 489 case. Includes shims and bearings for pinion and carrier, pinion seal, preload shim, ring gear bolts, pinion nut, cover gasket, gear marking compound, and brush
$246.75
Product Code: 83-1037
For 742 case. Includes shims and bearings for pinion and carrier, pinion seal, preload shim, ring gear bolts, pinion nut, cover gasket, gear marking compound, and brush
$242.28
Product Code: 83-5310-S
For 742 case with a spool. Includes shims and bearings for pinion, spool bearings, pinion seal, preload shim, ring gear bolts, pinion nut, cover gasket, gear marking compound, and brush.
$144.28
Product Code: 53182
Timken® bearings for 742 case
Product Code: 39016
10 spline, for 1350 series u-joint. "B"=3-1/2"
$70.23
Product Code: 53920
Includes pinion depth shims, crush sleeve, pinion seal, pinion nut / washer and marking compound.
$3.75
Product Code: 53902
8-3/4 pinion nut.
$56.58
Product Code: 53904
pinion seal for 742 case.
$27.39
Product Code: 53905
pinion seal for 489 case.
$35.00
Product Code: 53900
OEM left hand thread ring gear bolts (set of 12)
$5.20
Product Code: 53901
8 ¾ rear end gasket.
$594.40
Product Code: 53179
MW 35-spline, for Mopar 8-3/4"
$365.00
Product Code: 53187
MW 35-spline, Lightweight, for Mopar 8-3/4"
$341.00
Product Code: 53180
MW 35-spline for 742 or 489 8-3/4" case.
$96.55
Product Code: ML-001
MasterLine, 2.875" O.D., 1.562" I.D. for stock ends (with retainers). (pair)
$32.00
Product Code: 56501
For MW 53189 or 53188 housing ends. (pair)
$160.00
Product Code: 53189
For 3.150" bearings & inboard seal. (pair)
$198.00
Product Code: 53188
For Timken® roller bearing with seal (pair)
$111.71
Product Code: 56003
2.875" O.D., 1.562" I.D. for stock ends with spiral lock (pair)
$96.65
Product Code: 56001
2.875" O.D., 1.562" I.D. for stock ends (with retainers). (pair)
$106.55
Product Code: ML-003
$436.89
Product Code: 66700
Includes housing ends, bearings, retainers, seals, lock rings, and backing plate bolts.
$192.00
Product Code: 40500
10 spline, female, for 8-3/4" Mopar
$205.00
Product Code: 40550
30 spline, male, 5-3/4" long
$437.00
Product Code: 39102
Rapid release, 30 spline, for Mopar, Doug Nash, and Liberty transmissions. 1.680" diameter. "D"= 6-1/8"
$235.00
Product Code: 39002
30 spline, for 1350 series U joint. 1.680" diameter. "D"= 6-1/8"
© 2024, Mark Williams Enterprises Inc.