Your basket is empty.
0
Log In or Register
Enter your e-mail address to receive our newsletter
$70.00
Product Code: 58100
Replacement cap, billet steel, 3.062 bore case (each)
$4,200.00
Product Code: ACG-030
Upgraded replacement case for Eaton™ 19670 Posi
$96.00
Product Code: ACG-030-3
Cross pin for C2/C3 MW Case. Uses GM 12-Bolt spider gears. .809" diameter.
$204.00
Product Code: 39038
30 spline, for 1350 series U joint. "B"=2-7/8".
$2,100.00
Product Code: 50245-KIT
Inner yoke shafts for C2/C3 Corvette. 300M material, heat treated and shot peened. Includes billet u-joint caps. Requires slight modification to stock posi-traction unit. (sold as a pair)
Product Code: 50248-KIT
Inner yoke shafts for C2/C3 Corvette that has been converted to use a 12-Bolt Posi. 300M material, heat treated and shot peened. Includes billet u-joint caps. (Pair)
$3,164.00
Product Code: 50230-KIT
Axle flange (spindle) and splined yoke for C2/C3 ('63-'82) Corvettes. Includes Axle flange (spindle), splined universal joint yoke, Timken® bearings, SKF-CR seals, billet caps, locking nut, wheel studs, and solid preload shims. (Sold as a kit, both sides.)
$3,215.00
Product Code: 50225-KIT
32-spline. For '88-'96, C4. Includes spindle nut with fine adjustment locking device (pair)
$175.00
Product Code: SF58922
30-Spline Internal Axle Gear Kit for ACG-30 case.
$439.99
Product Code: 629-0165
4.10 10 BOLT LATE (8620) RICHMOND GEAR Richmond Gear. Fits 3 series carriers. 8.5” ring gear diameter, 1.625” diameter pinion, 30 spline, 8620 alloy.
$26.00
Product Code: 629-0000
The Richmond Gear video is designed for basic ring and pinion gear set-ups.
$1,990.00
Product Code: 50260
14-Bolt full floating hubs, 40-spline drive flange, choice of carrier spline (30, 35, or 40), 300M material (pr)
$19.62
Product Code: 300-1
0.032" diameter stainless steel wire
$12,389.00
Product Code: 99700
Includes fully assembled housing with 4-link brackets, aluminum thirdmember with large pinion 9" pro gear, lightweight steel spool, 40 spline floater axles, and brakes with drilled rotors.
$15,305.00
Product Code: 99750
Includes fully assembled housing with 4-link brackets, aluminum thirdmember with large pinion 9" pro gear, lightweight steel spool, 40 spline floater axles, and brakes with carbon rotors and carbon pads.
$11,734.00
Product Code: 97512
Complete assembly with aluminum 4-link brackets, aluminum end bells, 35 spline aluminum spool, Richmond Pro-gears, gun-drilled axles, MW disc brakes with carbon rotors and linings. Standard 35" wheel to wheel
$7,034.00
Product Code: 97412
Complete with axles, steel spool, pro gears, 1350 series pinion yoke, choice of housing ends, steel end bells, 4-Link brackets, and rectangular tie bar, MW disc brakes with steel drilled rotors, and drive stud kit
$8,160.00
Product Code: 97400
Aluminum through bolt case, 40 spline axles, lightweight steel spool, 35 spline 9" pro gear, steel 4-Link brackets, with tie bar, MW disc brakes, drive studs, 1350 series U-joint
$13,662.00
Product Code: 97050
Includes fully assembled housing with 4-link brackets, aluminum thirdmember with standard pinion 9" pro gear, aluminum spool, 40 spline flange axles, and brakes with carbon rotors and carbon pads
$2,340.00
Product Code: 96412
Steel Tube, any width housing, and 4-Link center to centers (19" minimum). Includes main caps, adjusters, pinion bearing races, rear cover, and choice of housing end. (no internal parts or axles)
$8,934.00
Product Code: 97012
Complete assembly with aluminum 4-link brackets, aluminum end bells, 35 spline aluminum spool, Richmond Pro-gears, gun-drilled axles, MW disc brakes with drilled steel rotors. Standard 35" wheel to wheel. 138 Lbs.
$4,074.00
Product Code: 96012
Standard 28-7/8" housing width, with aluminum billet 4-link brackets (18" centers), aluminum end bells
$4,397.00
Product Code: 95800
40 spline floater axles, complete floater brake kit, 5-1/2" bolt pattern. Series II.
$3,334.00
Product Code: 95850
40 spline axles, floater brake kit less spindles, 5-1/2" bolt pattern. Series II
Product Code: 95700
40 spline floater axles, complete floater brake kit, 5" bolt pattern. Series II.
Product Code: 95750
40 spline axles, floater brake kit less spindles, 5" bolt pattern. Series II
$1,701.00
Product Code: 95612
3" diameter tube, steel end bells, and housing ends.
$7,308.00
Product Code: 95555
40 spline floater axles, complete carbon / carbon floater brake kit, 5-1/2" bolt pattern. Series II.
$6,250.00
Product Code: 95570
40 spline axles, carbon / carbon floater brake kit less spindles, 5-1/2" bolt pattern. Series II
$9,862.00
Product Code: 93452
15-1/8" centers. Includes a 35-spline aluminum spool, aluminum end bells, aluminum 4-link brackets and spacers, pro gear, gundrilled axles, bearings, studs, and MW brake kit with carbon rotors and linings.
$5,835.00
Product Code: 93512
35 spline aluminum spool, lightened pro gears, MW superlight axles, Timken® wheel bearings, drive studs, MW carbon/carbon brakes
$5,247.00
Product Code: 95012
Complete 12 Bolt Modular assembly. Includes choice of housing ends, aluminum end bells, steel tubes, 30 Spline MasterLine axles, 1/2"-20 wheel studs, wheel bearings, spool, Eaton Posi, standard gears and 1350 yoke.
Product Code: 95400
40 spline floater axles, complete carbon / carbon floater brake kit, 5" bolt pattern. Series II.
$5,360.00
Product Code: 95412
Includes choice of housing ends, steel end bells, steel tubes, 30-spline MasterLine axles, bearings, Eaton posi, spool, 8620 street gears and 1350 yoke.
Product Code: 95450
40 spline axles, carbon / carbon floater brake kit less spindles, 5" bolt pattern. Series II
$1,963.00
Product Code: 95512
3" diameter 4130 steel tubes with 7075 aluminum end bells. Includes housing ends. For street use
$7,062.00
Product Code: 93412
15-1/8" centers. Includes a 35-spline aluminum spool, aluminum end bells, aluminum 4-link brackets and spacers, pro gear, gundrilled axles, bearings, studs, and MW drilled steel brakes.
$9,134.00
Product Code: 93052
Solid mount housing, 35-spline aluminum spool, pro gears, gundrilled axles, Timken® bearings, drive studs, MW disc brake kit with carbon rotors and linings
$6,333.00
Product Code: 93012
Solid mount housing, 35-spline aluminum spool, pro gears, gundrilled axles, Timken® bearings, drive studs, MW disc brake kit with drilled steel rotors
$2,168.00
Product Code: 92412
With 4-link brackets, tubular tie bar, standard end bells w/symmetrical brake mount pattern, (25-5/8" wide for 31-3/4" wheel to wheel width).
$10,996.00
Product Code: 91750
Includes fully assembled housing with solid mount brackets, aluminum thirdmember, axles, and brakes with carbon rotors and carbon pads
$20,360.00
Product Code: 90775
Includes Mark Williams 12" pitch diameter ring and pinion with 40-spline pinion shaft, ball bearing pinion support, 40-spline forged steel yoke, computer pickup assembly with two magnets, 40-spline aluminum spool, 7075 aluminum 4-link brackets, floater spindles, end bells, carbon fiber brakes, MW floater axles, and 2-year warranty against ring & pinion failure.
$2,988.00
Product Code: 91212
Complete center, less mounting brackets, end bells, axles, and brake. For quick and easy swaps.
$8,196.00
Product Code: 91700
Includes fully assembled housing with solid mount brackets, aluminum thirdmember, axles, and brakes with drilled rotors
$17,658.00
Product Code: 90770
Includes Mark Williams 12" pitch diameter ring and pinion with 40-spline pinion shaft, ball bearing pinion support, 40-spline forged steel yoke, computer pickup assembly with two magnets, 40-spline aluminum spool, 7075 aluminum 4-link brackets, floater spindles, end bells, steel drilled brakes, MW floater axles, and 2-year warranty against ring & pinion failure.
$17,486.00
Product Code: 90750
Includes Mark Williams 12" pitch diameter ring and pinion with 40-spline pinion shaft, ball bearing pinion support, 40-spline pinion coupler, computer pickup assembly with two magnets, 40-spline aluminum spool, floater spindles, lightened steel brakes, series II floater end bells, MW floater axles, and 2-year warranty against ring & pinion failure.
$18,328.00
Product Code: 90755
Includes Mark Williams 12" pitch diameter ring and pinion with 40-spline pinion shaft, ball bearing pinion support, 40-spline pinion coupler, computer pickup assembly with two magnets, 40-spline aluminum spool, floater spindles, end bells, carbon fiber brakes, MW floater axles, and 2-year warranty against ring & pinion failure
$41.75
Product Code: 90250
Slide hammer provides for easy removal of MW 12 bolt cover
$525.00
Product Code: 90122
4-3/16" long, for flange axles
$500.00
Product Code: 90124
3-11/16" long, for flange axles
$184.71
Product Code: 90132
For 9" Ford or 12 Bolt Modular housings (ea)
$600.00
Product Code: 90140
5-11/16" long, for flange axles
$650.00
Product Code: 90150
6-11/16" long, for flange axles
$1,247.00
Product Code: 90200
14" wide center module housing. Includes studs, nuts, washers, and cover. No brackets or bells.
$550.00
Product Code: 90118
4-11/16" Long, for Large O.D. bearing, for flange axles
Product Code: 90110
4-11/16" long, for flange axles
$1,886.00
Product Code: 75870
Complete 4 piston front brake kit, for ´69 - ´82 Corvette or any ´68 -´ 72 Chevy passenger vehicle with disc brakes
$222.00
Product Code: 81001
For 80000 series carbon/carbon outboard mount disc brakes. 5 hole, 4-3/4" and 5" bolt patterns. (each)
$1,612.00
Product Code: 75538
Direct replacement for OEM unit bearing hubs (pair)
$374.76
Product Code: 68800
Includes adaptors, hardware, seals, o-rings, bearings, and lock rings. (Requires small GM car brake - Camaro, Chevelle, Nova)
$3.00
Product Code: 71009
.015", to move disc out for fine adjustments. 4-3/4" & 4-1/2" x 5 bolt patterns (each)
$148.00
Product Code: 71022
For MW 70000 series brakes. 5 hole, 4-1/2", 4-3/4", & 5" bolt patterns. (each)
$286.90
Product Code: 67760
Includes retainers, o-rings, bearings, lock rings, and seals (requires large Ford ends with 3.150" bearing bore, 1/2" backing plate bolts)
$312.06
Product Code: 67770
Includes (2 ea) retainers, o-rings, bearings, lock rings, and seals (requires new style Ford ends with 3.150" bearing bore, 3/8" backing plate bolts, and 3-9/16" x 2 pattern)
$15.00
Product Code: 58945
Cross Pin 8.5" 10 bolt rear mini-spool
Product Code: 58965
Cross Pin 8.2" 10 bolt rear mini-spool
$95.00
Product Code: 58925
Special inner shim with assortment of standard carrier shims.
$44.40
Product Code: 58918
12 Bolt pinion nut / washer combination
$86.65
Product Code: 58920
pinion depth shims, carrier shims and a crush sleeve.
$32.00
Product Code: 58916
Pinion nut
$6.75
Product Code: 58917
Pinion washer
$13.30
Product Code: 58907
OEM crush sleeve
$18.27
Product Code: 58904
Pinion Seal
$47.00
Product Code: 58905
Made of heat treated 4140 steel. Requires machining to install.
$33.80
Product Code: 58903
GM and K.T.R.E housing cover, chrome
$78.91
Product Code: 58900
3/8"-24, 12 point 9/16" hex, .350" grip length, drilled for safety wire (set of 12)
$5.20
Product Code: 58901
Rear cover gasket
$376.25
Product Code: 58800
Must have GM small car brake. Includes, seals, o-rings, fastening hardware, and bearings
$208.00
Product Code: 58598
1.50" long, for 85mm (3.347") O.D. bearings with 45mm bore (pr)
$135.00
Product Code: 58599
2" long, for 85 mm (3.347") O.D. bearings with 45mm bore (pr)
$143.00
Product Code: 58600
For all 3.150 O.D. bearings, pair
$279.50
Product Code: 58610
Contains housing ends, bearings, retainers, backing plate bolts, nuts, and washers
$232.00
Product Code: 58595
2.25" long, for 85mm (3.347") O.D. bearings with 45mm bore (pr)
$35.00
Product Code: 58575
1/2" diameter bolts with nuts. Set of 8.
$175.96
Product Code: 58560
For midsize 10 or 12 Bolt tapered roller axle bearings and seals (pair)
$39.00
Product Code: 58570
3/8" diameter bolts with nuts and washers. Set of 8.
$223.13
Product Code: 58506
For MW Oval Track Axles. (pair)
$276.00
Product Code: 58350
Full size 12 Bolt and 1/2 ton pick-up, for use with M/W axles 1.625" I.D. bearing
$225.00
Product Code: 58250
Small 10/12 Bolt, for MW axles with 1.625" I.D. bearings
$237.00
Product Code: 58300
Full size 12 Bolt and 1/2 ton pick-up, for stock axles (requires grinding of axles for bearings)
Product Code: 58230
For 10 and 12-bolt 3.150 O.D. bearings (pair)
$47.04
Product Code: 57914
.812 long, includes retaining screws
$1,662.00
Product Code: 58025
DTS housing, 4130 tubes and any MW housing ends, 3.062" bore.
Product Code: 58030
DTS housing with 4130 tubes and any MW housing ends. 3.250" bore.
$48.00
Product Code: 57900
7/16", 12 point 3/4" hex, .50" grip length, drilled for safety wire. (set of 10)
$288.62
Product Code: 57760
Must have large Ford ends with 3.150" bearing bore, 1/2" backing plate bolts. Includes, seals, o-rings, fastening hardware, and bearings
$316.42
Product Code: 57770
Must have new style large Ford ends with 3.150" bearing bore, 3/8" backing plate bolts, and 3-9/16" x 2" pattern. Includes (2 ea) seals, o-rings, fastening hardware, and bearings
$6.30
Product Code: 57608
Includes retaining ring, bolts, and washers
$695.00
Product Code: 57465
9" Ford MW nodular iron (3.062" bore) NASCAR case with lightened caps, pump mounts, fluid ports, load bolt provision, adjusters, and pinion stud kit
$49.00
Product Code: 57449
Load bolt kit for MW cases.
© 2024, Mark Williams Enterprises Inc.