Your basket is empty.
0
Masterline by Mark Williams
 |
Why MW MasterLine Is Your Best ValueAnyone who knows Mark Williams will readily agree that he always strives to make the best possible parts. When faced with the challenge of developing a number of components for budget-minded racers and street enthusiasts, he rose to the occasion with the MasterLine series.While they may be economical in nature, when you consider how each component has been designed and manufactured, you'll see that all the extra effort results in parts that are superior to the competition. They are truly your best all-around value. |
MASTERLINE AXLES Mark Williams, on the other hand, individually makes each axle to the needs of the customer. The shaft length, taper and splined area are optimized for the application. No whacked-off long-spline axles here. What's more, they are forged from a true High Manganese alloy, and double induction heat-treated for deeper core hardness. You will also note that the flange of MasterLine axles is about 30% thicker than others, and it employs rugged 1.562" i.d. bearings for better support. Add in a gentle radius from the flange to the bearing surface, instead of sharp corners, and you can see still more reasons why MasterLine axles are better. Recommended for all street applications, and vehicles turning the quarter mile over 9.99 seconds. |
| |
MASTERLINE SPOOLS The perfect companion to MW axles, these spools feature a 35-spline design and are available to fit 8.8" Ford, 9" Ford and GM 12-bolt rear ends. They are CNC machined from alloy steel forgings and heat-treated in-house to assure total quality control. Extra care is take to ensure that the bearing journals and ring gear flange are perfectly perpendicular, which makes for optimum efficiency. |
MASTERLINE CASE Engineered to improve the reliability of 9" Ford rear ends, MW's MasterLine case is made from a tough nodular iron casting that features reinforcing ribs and an extra reinforced pilot bearing area. These precision CNC-machined cases are equipped with billet steel caps and bearing adjusters. Available with 3.062" or 3.250" bores. |
MASTERLINE GEARS These 8620 alloy gears are privately labeled for Mark Williams by one of the industry's most respected manufacturers. They are equal in quality to the finest "name" brand gears, but sold at very competitive prices. Available for GM 10-bolt (7.5 and 8.5 ring gears). |
MASTERLINE DRIVESHAFTS |
|